Elecraft K2 HF Transceiver
$525.00 plus shipping - SOLD

I built my first Elecraft K2 back in late 2000. Since then I have built three more, some for me and some for others. I still think this is one of the best HF CW transceivers ever built. I did not do the original build on this one. It belonged to a friend who has since passed away. I have gone through this one and fixed a couple of issues, done a complete alignment, and tested it on the air. Amazing that many contacts can be made with 5 or 10 watts and an attic dipole. This radio puts out in excess of 10 watts on all bands. Best to run at 10 watts or below.

This radio comes with the automatic antenna tuner (KAT2), the SSB adapter (KSB2), the noise blanker (KNB2), and the 160 meter board (K160M). It has the 2.03d firmware installed which includes many of the later features. It is an early K2 (pre serial number 3000) and has not been updated to the revision B level. It does perform very well. There are a few marks on the case sides and a small hole drilled in the square plastic button for the RATE switch. No microphone included. Microphone jack is wired for use with a Kenwood microphone such as the MC-43, MC-60, etc.

I will include a CD with the manuals for each part of this K2. They are also available on the Elecraft website at elecraft.com.


Please eMail if you have questions or desire more images. I will try to answer promptly.

E-mail Dick Housden - W0NTA


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]


[Elecraft K2]